ODOYO

Specifications:

· Water Resistance: IPX4
· Driver: Ø6mm (Dynamic)
· Impedance: 16Ω
· Sensitivity: (S.P.L) 93±3dB(at 1KHz 126mV)
· Frequency Response: 20Hz~20kHz
· Cord Length: 550MM
· Weight: 17g

· Bluetooth Version: Bluetooth 4.1
· Bluetooth Profile: A2DP / AVRCP / CVC6.0 / HFP / HSP
· Supported Audio Codecs: aptX / AAC / SBC
· Transmission: 10m
*Compatible with all Bluetooth-enabled devices, including Apple iPhone, Android, and Windows devices.

· Play time: Up to 7 hrs
· Charging Hours: 2 hrs
· Stand By Time: 30 hrs *Volume was set to 50%. Testing consisted of full PURDIO FLASH SX35 battery discharge while playing audio until the first PURDIO FLASH SX35 stopped playback. Battery life depends on device settings, usage, and many other factors.

Headphones don’t turn on

Power on the headphones (see“Powering on/off”section of the User Guide).
Charge the battery.

Charging cannot be done

Open the hinged cover on the side of the Left earbud and securely connect the small end of the USB cable to the USB connector. Make sure the connector on the cable is correctly aligned with the connector on the headphones.
Check that you are using the micro-USB cable supplied.
Check and secure both ends of the USB cable connected firmly.
Make sure your headphone return to room temperature after the headphones have been exposed to high or low temperatures, then try charging again

The remaining battery level of the headphones is not displayed on the screen of an iPhone, iPad, or iPod touch.

The remaining battery level is shown only on the screen of an iPhone, iPad, or iPod touch with iOS 5.0 or a later version that supports HFP (Hands-free Profile).
Make sure that the iPhone, iPad or iPod touch is connected to the headphones. Otherwise, the remaining battery level will not be displayed correctly.

Headphones don’t pair with Bluetooth® device

On your Bluetooth® device:
Turn the Bluetooth® feature on and then off.
Delete your “PURDIO FLASH” from the Bluetooth® list on your device. Then Pair again.
Move your Bluetooth® device closer to the headphones and away from any interferences or obstructions.
Pair a different Bluetooth® device (see“Pairing your Bluetooth® device” section of the User Guide).

Tips falling off

Securely attach the tips to the earbuds (see“FITTING THE PROPER EAR TITS” section of the User Guide)

No sound

Power on the headphones and charge the battery.
Increase the volume on your Bluetooth® device, and headphones.
Press the Power/Bluetooth® button to hear the beeping of the connected device. Make sure you are using the correct device.
Move your Bluetooth® device closer to the headphones and away from any interference or obstructions.
Use a different music source.
Pair a different Bluetooth® device (see “Pairing your Bluetooth® device” section).
If two Bluetooth® devices are connected, pause the playing device first and then play the other device.
If two Bluetooth® devices are connected, move the devices within (30 ft. or 10 m) range of the headphones.

Low sound Quality

Use a different music source.
Disconnect the second device.
Pair a different Bluetooth® device.
Clear any debris or wax buildup from the earbuds and headphone nozzles.
Move the Bluetooth® device closer to the headphones, and away from any interference or obstructions.

Distorted sound

Keep the headset away from a microwave oven, Wi-Fi device, etc.

No voice from callers

Check that both the headset and the connected device are turned on.
Turn up the volume of the headphones and the connected device.
Check that output of the Bluetooth® device is set for the headphones.
If you are listening to music using the headphones, end the call and stop the music on your Bluetooth® device, and call back the caller and talk.

Purdio Flash Bluetooth Wireless Stereo In-Ear Sport Headphones

COLOR:Angel Pink

Be the first to review “Purdio Flash Bluetooth Wireless Stereo In-Ear Sport Headphones” Cancel reply

Newsletter

Shop

Support

About Us